CZ-7 Series
CZ-7310
Panel mount plunger
Degree of protection
IP64 Operating surface
Contact form
1NO/1NC Snap-action
Head structure
Panel mount plunger
Operating force OF
6N
Release force RF
1N
Pretravel PT (Length)
2mm
Overtravel OT (Length)
6mm
Movement differential MD (Length)
0.8mm
Operating position OP
21.8±1.2mm
Features of the CZ-7 Series
■ Various actuators and some with adjustable operating position (such as CZ-7121)
■ Shell covered with intensive plastic for water-proof and oil-proof
■ The mechanical strength is better than CMV Series of horizontal limit switch
General Parameters
| Operating speed | 5 mm to 0.5 m/s |
| Operating frequency | Electrical: 20 times/min |
| Contact resistance | 25 mΩ max. Initial |
| Insulation resistance | 100 MΩ min. (at 500 VDC max.) |
| Minimum applicable load | DC 24 V 10mA or more |
| Rated insulation voltage UI | 380 V |
| Rated impulse withstand voltage Uimp | 4KV |
| Conventional free air thermal current Ith | 10 A |
| Vibration | 10to 55 Hz,1.5 mm double amplitude |
| Dielectric strength | Between non-consecutive terminals 1000 VAC,50/60Hz Continuous 1 minutes, Between current-carrying and non-current-carrying parts 1500 VAC,50/60Hz Continuous 1 minutes, Between terminals and ground 1500 VAC,50/60Hz Continuous 1 minutes |
| Shock | Mechanical durability: 1,000 m/Sec²approx.100G'SMalfunction durability: 100 m/Sec²approx.10G'S*1) |
| Ambient temperature | Operating:-20~+70 °C No icing |
| Humidity | General-purpose type: 85% RH or above,sealed type: 95% RH |
| Electrical durability | 500000 times or more 250 V/6Aresistive load |
| Degree of protection | IP64 Operating surface |
| AC-15 Safety specification certified rating | 10 A/250 V |
| DC-13 Safety specification certified rating | 0.3 A/220 V |
| CCC certification specification | GB/T14048.5 |
| TUV certification specification | EN 60947-5-1 |
| CE certification specification | EN 60947-5-1 |
Specification
1NO/1NC Snap-action
Long roller lever type with plastic roller
1.8N
0.5N
-
11mm
-
3mm
2.4mm
40±1mm
1NO/1NC Snap-action
Short roller lever type with plastic roller
2.4N
0.8N
-
6.5mm
-
2mm
1.5mm
40±1mm
1NO/1NC Snap-action
Long lever type
1.5N
0.4N
-
13.5mm
-
4mm
3.2mm
25±1mm
1NO/1NC Snap-action
Short lever type
2.2N
0.6N
-
8.5mm
-
2.5mm
2mm
25±1mm
1NO/1NC Snap-action
High roller long lever type
2N
0.6N
-
11mm
-
3mm
2.4mm
50±1.2mm
1NO/1NC Snap-action
High roller short lever type
2.8N
1N
-
6.5mm
-
2mm
1.5mm
50±1.2mm
1NO/1NC Snap-action
Low plunger type
6N
1N
-
2mm
-
0.8mm
0.8mm
30.5±0.8mm
1NO/1NC Snap-action
High plunger type
6N
1N
-
2mm
-
5mm
0.8mm
44±1.2mm
1NO/1NC Snap-action
Panel mount plunger
6N
1N
-
2mm
-
6mm
0.8mm
21.8±1.2mm
1NO/1NC Snap-action
Panel mounted horizontal roller plunger type
6N
1N
-
2mm
-
6mm
0.8mm
33.3±1.2mm
1NO/1NC Snap-action
Panel mounted vertical roller plunger type
6N
1N
-
2mm
-
6mm
0.8mm
33.3±1.2mm
1NO/1NC Snap-action
Plastic rod coil spring type
1.2N
-
12±3°
-
3±1°
-
-
-
额定值 Ratings
This product specification complies with global standards. However, regional specifications may vary slightly.
